***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Feb 24, 2025 6:29 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 40 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Andy Birko
PostPosted: Sun Mar 06, 2011 3:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Laurent Brondel wrote:
you all tune your plates, right?


I was actually going to write that in my post but decided not to at the last moment. Here's the thing though - if you pick a tighter rad to increase strength, and then shave the braces down to get you where you were before pitch wise, you've gained nothing in terms of stiffness. You may have gained more resistance from cracking due to low humidity though.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com


Last edited by Andy Birko on Sun Mar 06, 2011 3:10 pm, edited 1 time in total.

Top
 Profile  
 
Ian Cunningham
PostPosted: Sun Mar 06, 2011 3:10 pm 
Offline
Koa
Koa

Joined: Tue Apr 27, 2010 9:07 pm
Posts: 512
City: Tucson
State: AZ
Country: USA
Focus: Build
Status: Amateur
Laurent what are your GO sticks made of? Any specs to them at all?
Top
 Profile  
 
Laurent Brondel
PostPosted: Sun Mar 06, 2011 3:27 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States
Andy Birko wrote:
Here's the thing though - if you pick a tighter rad to increase strength, and then shave the braces down to get you where you were before pitch wise, you've gained nothing in terms of stiffness.
You wrongly assume that the radius, or arch, is for strength. It is not necessarily. Stiffer, as well as lighter, does not equal better all the time.

Ian Cunningham wrote:
Laurent what are your GO sticks made of? Any specs to them at all?
Ash, from the tree. 3/4" x 7/32".

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/
Top
 Profile  
 
Mark Groza
PostPosted: Sun Mar 06, 2011 3:47 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 01, 2008 8:51 am
Posts: 1310
Location: Michigan,U.S.A.
Focus: Build
Status: Professional
Laurent Brondel wrote:
Haans wrote:
I had not considered a cylindrical radius on the back (my tops are 15' cylinder), but that may be an interesting experiment. However, I wouldn't expect much difference as I mostly operate on an intuitive level and stop working a back when it sounds good and then work the whole box when it's together.
I use a mostly cylindrical back plate and add a tiny longitudinal arch to prevent the back from caving in when it's too dry. I agree that it does not make much difference. There is a lot of over-thinking about back or top radius: no matter what the radius is, you all tune your plates, right? So any difference a tighter radius will make is compensated (intuitively I should add) by either thinning the plate further and/or bracing.

Mark Groza wrote:
Laurent Brondel wrote:
However, for maximum strength, the back should be arched laterally and left flat longitudinally, like the section of a tube.
So a regular radius dish shouldn't be used when building a longitudinally flat back? What do you use?
I don't use dishes, but a long board with a 5' (or so) lateral arch.
I didn't think so.
I haven't used them for the back either.
Top
 Profile  
 
Ti-Roux
PostPosted: Sun Mar 06, 2011 4:08 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
I did my back radius sanding block with 3 pieces of 1'' MDF, carved a 16'' radius on the top of them, then screwed down a 3/16'' plexi on it. Double-side tape and a good 100 grit sandpaper. That simple. The 3/16 plexi gives the perfect rigidity for the job.

And by the way, to get an accurate radius, I took a 16'' chain, attached a pencil at the end, then went up a stairwell to draw the arch on a masonite. (i'm not joking [:Y:] )

I have photo of all that if somebody want.

Francis

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars
Top
 Profile  
 
Andy Birko
PostPosted: Sun Mar 06, 2011 4:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Laurent Brondel wrote:
You wrongly assume that the radius, or arch, is for strength. It is not necessarily. Stiffer, as well as lighter, does not equal better all the time.


I assumed nothing - I was just stating a fact for people to think about. In a prior post though, you did write this:

Laurent Brondel wrote:
Because it is under tension it is theoretically possible to use a thinner back for equal strength (to a flat one).

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
Laurent Brondel
PostPosted: Sun Mar 06, 2011 4:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States
Seriously Andy, note the "theoretically".
Secondly, even if a shallow radius adds marginal strength to a plate, it is not its primary purpose. Its primary purpose is to allow the back to become flatter when exposed to lower RHs, instead of caving in and crack.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/
Top
 Profile  
 
Andy Birko
PostPosted: Sun Mar 06, 2011 4:40 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Laurent, I'm not disagreeing with you! :P

You're not the only one posting on this thread though - My first response was to John who stated:

bluescreek wrote:
Not one ever said the back radius was anything more than a strength provider.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
bluescreek
PostPosted: Sun Mar 06, 2011 7:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4910
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
The radius back will have more strength ( stiffness ) than a flat back. That is a fact. It also does help with RH changes and allows cross grain movement to a degree.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it
Top
 Profile  
 
Haans
PostPosted: Sun Mar 06, 2011 7:50 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
The easiest way to make a kinda cylindrical (I forget the name...Howard?) sander for ribs and back or top is to get some 1/4" ply and nail it down in the middle. Jack up the ends with a couple of sticks and you have it.
Top
 Profile  
 
alan stassforth
PostPosted: Sun Mar 06, 2011 8:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
You can stab a potato with a freakin drinking straw, and it will penetrate.
If you flattened out the straw,
it would bend.
So, cylindrical is stronger, end to end.
Top
 Profile  
 
Andy Birko
PostPosted: Sun Mar 06, 2011 10:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
bluescreek wrote:
The radius back will have more strength ( stiffness ) than a flat back. That is a fact. It also does help with RH changes and allows cross grain movement to a degree.


That's only true (the first part) when all other things are equal. If you shave down the braces because you put a tighter radius in the back to bring the tap tone back down...well then you're not that much stronger now are you?

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
Laurent Brondel
PostPosted: Mon Mar 07, 2011 10:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States
Haans wrote:
The easiest way to make a kinda cylindrical (I forget the name...Howard?) sander for ribs and back or top is to get some 1/4" ply and nail it down in the middle. Jack up the ends with a couple of sticks and you have it.
That's the way I do it, except I use hardboard. That would result in a spline curve, and not a perfect radius (to answer for Howard).
Andy Birko wrote:
You're not the only one posting on this thread though
I responded because you quoted me twice in your post.
Andy Birko wrote:
bluescreek wrote:
The radius back will have more strength ( stiffness ) than a flat back. That is a fact. It also does help with RH changes and allows cross grain movement to a degree.
That's only true (the first part) when all other things are equal. If you shave down the braces because you put a tighter radius in the back to bring the tap tone back down...well then you're not that much stronger now are you?
Except trying to stir up controversy, I have no idea what your point is. John, I and others have responded and seem in rough agreement.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/
Top
 Profile  
 
Andy Birko
PostPosted: Mon Mar 07, 2011 10:25 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Laurent Brondel wrote:
Except trying to stir up controversy, I have no idea what your point is. John, I and others have responded and seem in rough agreement.


Actually,I just went back and re-read this thread and I see that I mis-read one of your posts and basically re-stated what you wrote in that post. Sorry about that. What I don't understand is why you disagreed with it when I re-stated the same thing you did.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
Billy T
PostPosted: Wed Mar 09, 2011 5:21 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Dec 25, 2005 7:58 pm
Posts: 2946
Location: United States
The differences in the radii of 15' and 20' are about 3/64th(.0467) over that distance of an 18" back. Hardly discernible, either tone wise or mechanically.

_________________
Billy Dean Thomas
Covina, CA

"Multi famam, conscientiam, pauci verentur."
(Many fear their reputation, few their conscience)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 40 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: mike-p and 44 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com